3/8" ID x 15' Flexible Rubber Air Hose 300 psi 1/4" MPT x 1/4" MPT CRIMP The port should be installed

The port should be installed so that the stream of water shooting into the tank does not point directly at the pressure washer suction/supply Bulkhead

This is the only pump on the market that will allow the operator to fully control the flow by using any nozzle size suitable for the job

The unloader should be set using a Whip Hose

PA Repair Kit 4

SKU:  6226

3/8" ID x 15' Flexible Rubber Air Hose 300 psi 1/4" MPT x 1/4" MPT CRIMP The port should be installed3 8" ID x 15' Flexible rubber air hose 300 psi 1 4" MPT x 1 4" MPT (Suitable for 1 2 ALL Flo, Yamada, ARO, Ingersoll Rand, 1 2" air diaphragm pump or pump with a 1 4" air port). If your pump has a 1 4" port, always upsize the air hose ID at least one size up. We recommend a desiccant filter after the regulator and before the pump. Straight end and elbow end. Install elbow at the pump. Hose is 15' in length. SKU: HA06 15