ROBOFUSION MicoAir MTF-01 Optical Flow & LiDAR Sensor for Ardupilot/PX4/INAV (PX4) healthDE_Nov2023 and 60pcs M8 flange nuts

and 60pcs M8 flange nuts

This set includes a variety sizes of grease fittings allowing you to choose the right one for your specific needs

bringing the two corners together

Do not use if you have skin abnormalities such as wounds

Depending on your selection you will receive 300 Strips of Blue or 300 Strips of Red paper

ROBOFUSION MicoAir MTF-01 Optical Flow & LiDAR Sensor for Ardupilot/PX4/INAV (PX4) healthDE_Nov2023 and 60pcs M8 flange nutsROBOFUSION MicoAir MTF 01 Optical Flow & LiDAR Sensor for Ardupilot PX4 INAV (PX4) Description MTF 01 is an optical flow ranging integrated sensor developed by MicoAir Technology. It uses uart to output data and is compatible with mainstream open source flight controllers such as Ardupilot, PX4, and INAV. (You can freely modify the communication protocol between the sensor and the flight controller using the USB to UART TTL Module making it compatible