Description
The outer ring incorporates synthetic rubber molded to a steel plate
due to contact seal Speed capability Good Good Limited by contact seals Grease-sealing effectiveness Good Better than ZZ type Slightly better than VV type Dust resistance Good Better than ZZ type (usable in moderately dusty environments) Best (usable even in very dusty environments) Water resistance Not suitable Not suitable Good (usable even if fluid is splashed on bearing) Operating temperature –10 to +110 °C –10 to +110 °C –10 to +110 °C Note (1) The above temperature range applies to standard bearings
Specification item model symbol Specification information With auto switch D With auto switch Mounting support type B Basic type tube inner diameter 16 tube inner diameter 16mm cylinder stroke 70 dual stroke mark - No dual stroke mark cylinder stroke 2 - Cylinder stroke 2 None Cylinder additional symbol A air cushion Port location on head cover - 90° about axis rocking support bracket - no metal fittings rod end bracket - no metal fittings auto switch - Without auto switch Auto switch additional symbol - 2 with or without Auto switch mounting type B band attached Custom made specifications - standard
Part number Measuring range A B C D E YC-5 50~70 9
the contacts are connected to the body
SMC CRB1 Series Rotary Actuator Vane Type, CDRB1FWU30-270S-R73L Vacuum Tweezers Portable The outer ring incorporates syntheticOVERVIEW Auto switch mounting position can be moved anywhere Direct installation possible Connection port location: body side, axial direction selectable Low pressure operation: 0. 15MPa (size 50 to 100) Auto switch attached (CDRB1 series: CDRB1, CDVRB1) Configuration Options 1 With auto switch (With auto switch unit and built in magnet) * Refer to page 99 when the auto switch unit is needed separately 2 Mounting B Basic type L Foot Type 3 Shaft type