Description
E7018-1 Finish/Coating Low-Hydrogen Iron Powder Elongation (Minimum Required) 22 % Maximum Tensile Strength (As Welded) 70 to 79 ksi For Welding Position Flat
With precise and durable construction
Seat Height 1 3/4 in
Tool Type: Broom
59 CSA Footwear Standard Not Specified Removable Insole Yes Toe Shape Round Insole System Polyurethane Upper Boot Material All Leather Footwear Shank Type Nylon Mark II Slip Test Results- Dairy Tile Oily Not Tested Ninety Degree Heel Yes Chain Saw Cut Resistant No Footwear Sole Pattern Exclusive Design Completely Non Metallic No Predominant Footwear Color Brown Wide Toe Cap Yes Insulation Type None Metal Chip Resisting Sole No For Outdoor Traction No Shank Material Nylon Mark II Slip Test Results- Dairy Tile Oily Wet Not Tested Puncture Resistant Insole No Style Number 13860 Waterproof Type Gore-Tex Metatarsal Guard No Footwear Construction Type Cemented Liner Material Gore-Tex(R) Footwear Style Hiker Boot Upper Material Description Full Grain Leather Outsole Material Rubber Conductive No ASTM Footwear Class F2413-18 I/C/EH Last Number or Name DLE-01 Satra Slip Test Results- Dairy Tile Oily Wet Not Tested Oil Resisting Sole Yes Mark II Slip Test Results- Dairy Tile Dry 1
McMaster 26035A225 Carbon Steel Tap Taper Chamfer, 1-3/8"-12 Thread Size, 3" Thread Length RC59 E7018-1 Finish/Coating Low-Hydrogen Iron PowderCut threads into holes so screws, bolts, and rods fit snugly. Our basic taps have straight flutes that are good for most jobs. Carbon SteelThe economical choice for occasional hand tapping. These work on most metals and plastic but will dull more quickly than other taps. Taper ChamferGood for both starting holes and threading through holes. These taps have the longest taper to gradually engage with the material, reducing the force needed to turn them.